|Country of Origin||Fujian China|
|Payment & Shipping Terms|
|Average Delivery Time||30days|
|Payment Method||TT, western union|
|Ability to Supply||200pcs per month|
ESD5500E Electronic Speed Control Description
ESD5500E is based on ESD5111. It has newly added starting fuel quantity control and smooth and slow starting process control. These new features can solve the black smoke phenomenon caused by rapid refueling during the start of the engine, which greatly improves the engine life. . It is a very rich and perfect model at present and is widely used in new generators.
The ESD5500E generator electronic governor is very sturdy and can be placed in a control cabinet or engine mounting box with other special control equipment. If water, mist or condensate may come in contact with the controller, it should be installed fixedly. This will allow fluid to drain from the speed control unit.
The 5500E Series speed control unit is an all-electronic device designed to control engine speed with fast and precise response transient load changes.
*ESD5520E is designed for the EFC series.
*Isochronous Operation/Steady Stability---- +/-0.25% or better
*Supply----12 or 24 VDC Battery Systems(transient&reverse voltage protected)
*Power Consumption----50 ma continuous plus actuator current
*Maximum Actuator Current at 25celsius (77celsius F)----10 Amps continuous
|Input||Supply||12 or 24 VDC Battery System (Transient and Reverse Voltage)|
|Polarity||Negative Ground (Case Isolated)|
|Power Consumption||50 ma continuous plus actuator current|
|Actuator Current Range @ 25||Min.2.5 Amps; Max. 10Amps continuous|
|Deg. C - (Inductive Load)|
|Speed Sensor Signal||0.5-120 Volts RMS|
|Performance||Isochronous Operation/Steady||±0.25% or better|
|Speed Range/Governor||1K to 7.5K Hz continuous|
|Speed Drift with Temperature||±1 Max|
|Idle Adjust CW||60% of set speed|
|Idle Adjust CCW||Less than 1200 Hz.|
|Droop Range||1-5% regulation|
|Droop Adj. Max. (K-L Jumpered)||400 Hz., ±75Hz. Per 1.0A change|
|Droop Adj. Min. (K-L Jumpered)||15Hz., ±6Hz. Per 1.0A change|
|Speed Trim Range||±200 Hz|
|Remote Variable Speed Range||500 - 7.5 Hz. Or any part thereof|
|Terminal Sensitivity J||100 Hz., ± 15Hz / Volt @ 5.0 K Impedance|
|Terminal Sensitivity L||735 Hz., ±60 Hz / Volt @ 65 K Impedance|
|Terminal Sensitivity N||148 Hz., ±10 Hz / Volt @ 1 Meg. Impedance|
|Terminal Sensitivity P||10 VDC Supply @ 20 ma Max|
|Environmental||Ambient Operating Temperature||-40 to +85 Deg. C|
|Relative Humidity||Up to 95%|
|All Surface Finishes||Fungus Proof and Corrosion Resistant|
|Reliability||Vibration||1G at 20 to 100 Hz.|
|Testing||100% Functionally Tested|
|Physical||Dimensions||See outline (FIGURE 1)|
|Weigh1||1.2 lbs.(545 grams)|
|Mounting||Any position, Vertical Preferred|
ESD5500E Electronic Speed Control Advantage
|Adopting Best Component Only
ZOZHI never compromise the quality, focus on details
Each component is strictly tested before assembling.
Using importing for the main parts.
|100% exactly replaced and match
During over 10 years improving, the 5500E can 100% replaced the original one and perfect match for most of the engine
| Advanced equipment
The factory used the advanced equipment to produce, assembly and inspect the control governor. To ensure the high accuracy
Fill out more information, We will get back to you within 24 hours.
NO.155 SHANGCUN QINXIYANG INDUSTRY ZONE,FUAN CITY,FUJIAN,CHINA
Business Phone : 0593-6532656
Work Time :08:00-18:00(Beijing time)